Jump to content

Pentation

From Wikipedia, the free encyclopedia
(Redirected from Quintation)
The first three values of the expression x[5]2. The value of 3[5]2 is about 7.626 × 1012; values for higher x, such as 4[5]2, which is about 2.361 × 108.072 × 10153 are much too large to appear on the graph.

In mathematics, pentation (or hyper-5) is the fifth hyperoperation. Pentation is defined to be repeated tetration, similarly to how tetration is repeated exponentiation, exponentiation is repeated multiplication, and multiplication is repeated addition. The concept of "pentation" was named by English mathematician Reuben Goodstein in 1947, when he came up with the naming scheme for hyperoperations.

The number a pentated to the number b is defined as a tetrated to itself b - 1 times. This may variously be denoted as , , , , or , depending on one's choice of notation.

For example, 2 pentated to the 2 is 2 tetrated to the 2, or 2 raised to the power of 2, which is . As another example, 2 pentated to the 3 is 2 tetrated to the result of 2 tetrated to the 2. Since 2 tetrated to the 2 is 4, 2 pentated to the 3 is 2 tetrated to the 4, which is .

Based on this definition, pentation is only defined when a and b are both positive integers.

Definition

[edit]

Pentation is the next hyperoperation (infinite sequence of arithmetic operations, based off the previous one each time) after tetration and before hexation. It is defined as iterated (repeated) tetration (assuming right-associativity). This is similar to as tetration is iterated right-associative exponentiation.[1] It is a binary operation defined with two numbers a and b, where a is tetrated to itself b − 1 times.

The type of hyperoperation is typically denoted by a number in brackets, []. For instance, using hyperoperation notation for pentation and tetration, means tetrating 2 to itself 2 times, or . This can then be reduced to

Etymology

[edit]

The word "pentation" was coined by Reuben Goodstein in 1947 from the roots penta- (five) and iteration. It is part of his general naming scheme for hyperoperations.[2]

Notation

[edit]

There is little consensus on the notation for pentation; as such, there are many different ways to write the operation. However, some are more used than others, and some have clear advantages or disadvantages compared to others.

  • Pentation can be written as a hyperoperation as . In this format, may be interpreted as the result of repeatedly applying the function , for repetitions, starting from the number 1. Analogously, , tetration, represents the value obtained by repeatedly applying the function , for repetitions, starting from the number 1, and the pentation represents the value obtained by repeatedly applying the function , for repetitions, starting from the number 1.[3][4] This will be the notation used in the rest of the article.
  • In Knuth's up-arrow notation, is represented as or . In this notation, represents the exponentiation function and represents tetration. The operation can be easily adapted for hexation by adding another arrow.
  • In Conway chained arrow notation, .[5]
  • Another proposed notation is , though this is not extensible to higher hyperoperations.[6]
  • Some people might also do repeated exponents, as a^^^b. This is not the most popular way but still noteworthy

Examples

[edit]

The values of the pentation function may also be obtained from the values in the fourth row of the table of values of a variant of the Ackermann function: if is defined by the Ackermann recurrence with the initial conditions and , then .[7]

As tetration, its base operation, has not been extended to non-integer heights, pentation is currently only defined for integer values of a and b where a > 0 and b ≥ −2, and a few other integer values which may be uniquely defined. As with all hyperoperations of order 3 (exponentiation) and higher, pentation has the following trivial cases (identities) which holds for all values of a and b within its domain:

Additionally, we can also introduce the following defining relations:

Other than the trivial cases shown above, pentation generates extremely large numbers very quickly. As a result, there are only a few non-trivial cases that produce numbers that can be written in conventional notation, which are all listed below.

Some of these numbers are written in power tower notation due to their extreme size. Note that .

  • .
  • (a number with over 10153 digits)
  • (a number with more than 10102184 digits)

See also

[edit]

References

[edit]
  1. ^ Perstein, Millard H. (June 1961), "Algorithm 93: General Order Arithmetic", Communications of the ACM, 5 (6): 344, doi:10.1145/367766.368160, S2CID 581764.
  2. ^ Goodstein, R. L. (1947), "Transfinite ordinals in recursive number theory", The Journal of Symbolic Logic, 12 (4): 123–129, doi:10.2307/2266486, JSTOR 2266486, MR 0022537, S2CID 1318943.
  3. ^ Knuth, D. E. (1976), "Mathematics and computer science: Coping with finiteness", Science, 194 (4271): 1235–1242, Bibcode:1976Sci...194.1235K, doi:10.1126/science.194.4271.1235, PMID 17797067, S2CID 1690489.
  4. ^ Blakley, G. R.; Borosh, I. (1979), "Knuth's iterated powers", Advances in Mathematics, 34 (2): 109–136, doi:10.1016/0001-8708(79)90052-5, MR 0549780.
  5. ^ Conway, John Horton; Guy, Richard (1996), The Book of Numbers, Springer, p. 61, ISBN 9780387979939.
  6. ^ "Tetration.org - Tetration". www.tetration.org. Retrieved 2022-09-12.
  7. ^ Nambiar, K. K. (1995), "Ackermann functions and transfinite ordinals", Applied Mathematics Letters, 8 (6): 51–53, CiteSeerX 10.1.1.563.4668, doi:10.1016/0893-9659(95)00084-4, MR 1368037.